The company stated that mining operations using trucks with capacities to 172t can now choose the 16M3, which it called the popular workhorse of the industry, or if more capability is required, the more productive 18M3.
The new 18M3 features an average of 5% greater power in each gear as compared to the 16M3, and the new motor grader is equipped with an 5.5m mouldboard as compared to the 4.9m mouldboard of the 16M3. More power and greater coverage per pass are designed to increase productivity.
The added blade length also can be used to grade with a more aggressive blade angle of about 8° - the increased blade angle is designed to reduce blade loading, and combines with the additional power and weight and refined balance of the 18M3 for highly productive cutting passes.
The 18M3 is equipped with features designed for mining operations. Front axle and transmission guards protect key machine components against heavy debris and rocks, and all required provisions and brackets are in place to install most major fire-suppression systems without compromising machine components and structures. The fire-suppression-ready system complies with the guidelines of major system providers.
Engine and drive train
The 18M3 is powered by a Cat C13 ACERT engine, which uses the Caterpillar Optimised Variable Horsepower (VHP) system, designed to deliver optimum power in each gear for the operating situation. The engine is available in three configurations to satisfy global emissions standards: US EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final); Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent; and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent.
To enhance fuel efficiency, ECO mode limits engine speed to 1,900rpm in working gears during light to moderate load applications. This operator-selected feature maintains peak performance in lower gears and automatically disengages in gears 6F-8F and 4R-6R. ECO Mode is not available for Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards machines.
The Cat direct drive, power shift transmission, with eight forward and six reverse gears, uses the Cat Advanced Productivity Electronic Control Strategy (APECS) system for smooth shifting and extended component life. The heavy-duty modular trans-axle has a standard automatic differential lock that engages and disengages as required.
The hydraulic brakes use large discs and pistons to provide a high dynamic braking torque, and a new manual brake wear indicator simplifies disc wear measurement, eliminating the need to remove the brake pods to check wear.
Structures and hydraulics
The front frame is fabricated of continuous top and bottom plates, and the centre-shift section is a heavy-duty steel casting that effectively distributes stress in this highly loaded area of the mainframe. The long rear frame uses two bumper castings and thick hitch plates for long term durability. The front axle is designed for extended cylinder bearing life. Standard equipment for the 18M3 includes a ripper and front counterweight.
The 18M3 features the Cat load sensing hydraulic system with advanced Proportional Priority Pressure Compensating electrohydraulic valves. The system provides precise implement control and continuously matches hydraulic flow and pressure to power demands for added fuel savings and reduced heat generation.
The full colour, touch-screen display allows monitoring machine performance, setting operating parameters (such as blade-lift modulation), and accessing service information for initial troubleshooting. The display shows Cat Grade Control Cross Slope readings, DEF (diesel exhaust fluid) level, and information pertinent to daily operation. The Advanced-Control joysticks allow easy control of the Cat Grade Control Cross Slope or AccuGrade systems, and a keypad with lighted, one-touch buttons simplifies operation.
Hardware for Product Link Elite, the Cat advanced telematics system, is standard and provides technologies for improved fleet management via the VisionLink online interface. New capabilities include global 3G-cellular-network and lower-latency satellite connections.
Safety and service
The standard rear-view camera system provides images on the new information display or on an optional LCD screen above the rear-view mirror. Also standard are the speed-sensitive steering and a seat belt indicator, which alerts the operator that the belt is not fastened and records the incident as a fault code.
The optional enhanced-access platform provides ladders, walkways and handrails for a second access path to the engine compartment and cab, and an alternate configuration provides enhanced access to the engine compartment. Grab handles and a non-slip step provide improved access to the tandem walkways when platforms are not ordered. French-door-type panels on the engine enclosure allow easy access to service points, and two large LED lights illuminate the engine compartment. Ground-level engine shut-off and electrical-disconnect switches are standard. The 18M3 also uses a new modular cooling package, which facilitates removal and installation of components in the cooling system.