More uptime with the right mill lining

Erzgebirgische Fluss- und Schwerspatwerke (EFS) has tested Metso’s Poly-Met mill lining to help optimise uptime at the processing plant of its German fluorspar mine
More uptime with the right mill lining More uptime with the right mill lining More uptime with the right mill lining More uptime with the right mill lining More uptime with the right mill lining

Silvio Spiegel and Åsa Almström together with Matthias Friedrich outside 

Staff reporter

PRESS RELEASE: EFS operates an underground mine and a processing plant in Saxony in eastern Germany. With the pit being the first new underground deposit exploration in Germany in the past 40 years, EFS thereby initiated a renaissance of the mining industry in the country. But it has not been easy and risk-free.

Matthias Friedrich, plant manager at EFS commented: “In a very short time, we had to learn a lot of new things and try them out. Despite hard work, the help of external experts was necessary to reach the goal.”

Since production of high-grade fluorspar started in August 2014, EFS is one of Europe’s few suppliers of fluorite and barite concentrates. It has now set up a reliable customer base in Germany and the Czech Republic. However, the world market has been very competitive in recent years, and some new open-pit projects with lower costs are starting up in several countries. EFS stated that it knows it has to come up with new ways to improve the process and to use modern technology to be able to be more efficient.

“Low machine fail times are important for us; we need to rely on our equipment to work optimally. Unplanned stops inevitably lead to additional costs,” said Friedrich.

Grinding is a vital part for the subsequent flotation. This is an obvious challenge for EFS, which has only one ball mill to grind all material from the mine. The mill is equipped with a mill lining from Metso.

“We have had a trustful cooperation with Metso since we started the plant design. Our Metso representative makes regular wear monitoring and face-to-face reports, which I really appreciate. We have a close relationship, and I feel confident that they work continuously to improve uptime. They know about our challenges, and their experience and knowledge about mill linings and grinding have been very helpful,” noted Friedrich.

Metso has been supplying EFS with products and services from the very beginning. The site is equipped with Metso crushers, pumps, slurry hoses and Poly-Met mill lining. Moreover, Metso is helping out with maintenance services, wear monitoring and so forth.

Åsa Almström, area product support manager, mill lining solutions at Metso explained: “We want the mill lining to have a balanced wear life, meaning that all liner parts should be worn out at the same time to avoid any extra maintenance stops. The aim for EFS is that the whole lining is changed at the same time, so the first ring needs to be as wear resistant as the rest of the mill. At the same time, because we want to keep up the capacity of the mill, we cannot make it too thick.”

The mill has been equipped with a reliable rubber lining since the start. However, a trial with a Poly-Met mill lining on the first ring is now taking place. The lining has been installed for six months and the test results look promising.

“Metso Poly-Met lining is extremely wear resistant and yet thinner than a rubber lining would be. As a result, I would say that we will significantly increase the plant availability,” Friedrich added.

Read more about grinding wears

Related links:

Most read Partners

Most read Partners